(609) 474-4242

Hunter Douglas Remote Battery Replacement

A Hunter Douglas remote battery replacement is a two-minute job. Every PowerView remote takes the same cell, and the one thing people get wrong is which way up it goes.

We sell battery wands, not remotes, so there is no sale in this for us. A tired remote usually just wants two new coin cells.

Which battery does my Hunter Douglas remote take?

Remote Battery
PowerView Pebble remote (Legacy, before fall 2022) Two CR2032 coin cells
PowerView Surface remote (Legacy) Two CR2032 coin cells
PowerView Gen 3 remote (from spring 2022) Two CR2032 coin cells
PowerView Scene Controller Two CR2032 coin cells
PowerRise remote (older infrared system) Two AAA alkaline

CR2032 only. A CR2025 or CR2016 is the same width but thinner. It sits in the holder, makes poor contact, and you get a remote that only works when you squeeze the back. The full table, wands included, is on Hunter Douglas battery specifications.

Hunter Douglas expects about a year from a set of remote cells.

How do I know the remote batteries are low?

A remote with weak cells fades rather than failing outright. It works across the room but not across the house, then only sometimes, then not at all. The specific signs:

Every blink pattern is decoded on Hunter Douglas remote flashing.

How do I open a PowerView Pebble remote and change the cells?

  1. Slide your thumb into the indentation and lift the remote module out of the Pebble cradle.
  2. Put a coin in the slot on the back of the module and twist the cover off.
  3. Take the two old cells out.
  4. Fit two new CR2032 cells, both positive side up.
  5. Twist the cover back on until it stops.

Both cells go the same way. Plenty of two-cell gadgets alternate them; this one does not. And a cover a quarter turn short gives you a remote that works on the table and not in the cradle, because the cover is what presses the cells onto the contacts.

What about a Gen 3 remote?

Same two CR2032 cells. Two things are different:

What about the old PowerRise remote?

It takes two AAA cells, not coin cells. Hunter Douglas says replacement PowerRise remotes are no longer available. The shade still runs from the button on the headrail; PowerRise or PowerView? tells the two systems apart.

I changed the batteries and the remote still does not work

Go through these in order:

  1. Check both cells are positive side up and the cover is fully twisted on.
  2. Try cells from a sealed pack. Coin cells from a drawer, or a multipack that sat on a shelf for years, can arrive half-flat.
  3. Press the programming button on the shade's headrail. If the shade moves, it has power and the problem is the remote or its pairing. If nothing happens at all, the shade has no power, and the remote is innocent.
  4. Point the remote at another shade. If the others respond and this one does not, that one shade has lost its pairing. Re-pairing is free: how to reset a Hunter Douglas remote.

The longer checklist is on remote not working after changing the batteries, and the hub and app side is on Hunter Douglas remote not working.

If the remote shows no lights at all with fresh cells correctly installed, it has failed. Hunter Douglas or your original dealer is the place to go.

When is it the shade, not the remote?

When the headrail button gets nothing either: no travel, no jog, no sound. That is the AA cells in the shade's battery wand, the wand itself, or the cable. Is it the wand? sorts out which, and which batteries? covers the AA side.

What we stock

We do not sell remotes, hubs or repeaters. If the shade is the problem, count the batteries in its wand.

All new, genuine Hunter Douglas stock, shipped free within the United States, same business day on orders placed before 3pm Eastern.

Still stuck? Call (609) 474-4242 weekdays, 9am to 5pm Eastern, or email support@batterywands.com. We will tell you when the answer is that you do not need a part.

Replacement parts. Complete your repair.

Common parts for Hunter Douglas motorized shades.

All Hunter Douglas battery wands