Which Wand PowerView Shades Use: Hunter Douglas PowerView Battery Wand
Updated
Most battery-powered PowerView shades run on an AA battery wand: a tube of ordinary AA cells that slides into a bracket on the back of the headrail. There are two of them, and the only thing you need to know to pick the right one is how many batteries yours holds.
Already know it is the wand? Genuine 18V and 12V wands from $17.95 ↓
Which PowerView generations use the AA battery wand?
Hunter Douglas has used the same two AA wands across several generations of motorized shades:
- PowerRise 2.0 and 2.1 with Platinum Technology, installed between 2012 and 2015, just before PowerView
- Legacy PowerView, everything before fall 2022, with the Pebble and Surface remotes and the hub
- PowerView Gen 3, from spring 2022 onward
The current 18V wand, part 7520068000, is listed for twelve-cell headrails on all three. The 12V wand, part 7520069000, fits PowerView headrails built for eight cells, and most of the older PowerRise 1.0 shades too.
What does not tell you the wand is the generation. PowerView shades were built with either one, depending on the line and how the shade was ordered. Eight cells does not mean an old shade.
Is it 18V or 12V on my shade line?
Hunter Douglas documents it line by line. In short:
| Shade line | Wand |
|---|---|
| Provenance Woven Wood | 18V only, twelve AA |
| Designer Roller and Banded | 18V only, twelve AA |
| Parkland and EverWood wood blinds, from May 2018 | 12V only, eight AA |
| Modern Precious Metals, from May 2018 | 12V only, eight AA |
| Palm Beach shutters | 12V only, eight AA |
| Duette, Applause, Silhouette, Vignette, from May 2010 | Either, so count |
| Nantucket, Sonnette, Duette Vertiglide | Either, so count |
| Solera | Count to confirm |
| Pirouette over 23 inches wide | 18V, twelve AA |
| Pirouette 18 to 23 inches wide | A different eight-cell part, 7520073000, which we do not stock |
Pirouette is the one line where width decides it, not the cell count. Measure before you order: eight batteries in a narrow Pirouette does not mean our 12V wand is the right part.
Hunter Douglas's own sources disagree on narrow Pirouettes: its parts store lists 7520069000 as Pirouette-compatible, while its wand identification guide gives 7520073000 or 7520067000 for 18 to 23 inch widths. So read the sticker on the old wand before you order; the Pirouette fit guide shows what each number means.
The full list, with Hunter Douglas's own notes for each line, is on the compatibility list.
How do I identify my PowerView battery wand?
Count the batteries. Raise the shade fully, slide the wand lengthways out of its bracket, and count the cells or the empty channels.
That works when the label has worn off and when nobody remembers what was bought. When the label and the count disagree, trust the count. If the label is readable, the part number is printed on it, and Hunter Douglas battery wand part numbers explains the older and pre-loaded numbers you may find.
The two wands are not interchangeable. The motor expects its own voltage, and the wrong wand will not run the shade.
Is my shade PowerView at all?
Look at the controls rather than the wand. A Pebble or Surface remote with group buttons 1 to 6 and two CR2032 coin cells inside means PowerView. A remote that takes two AAA batteries means PowerRise. If the shades have ever run from the PowerView app, they are PowerView. PowerRise or PowerView? covers it in more detail.
For the wand itself, the battery count decides it either way.
Rechargeable or AA: which PowerView battery wand should you buy?
For most shades, the AA wand. Hunter Douglas also sells a sealed lithium-ion wand that you charge instead of filling with AAs, launched for PowerView on July 7, 2020 and sold as retrofit kit 1020151 (no extension cable) through 1020155 (20 ft cable). It is listed for 18V PowerView and Platinum shades that already use the twelve-AA wand, so it is not a part for an eight-cell headrail.
Approximate cost for one shade, using dealer prices seen in October 2026:
| AA wand | Rechargeable wand | |
|---|---|---|
| Wand | $17.95 here, 18V or 12V | 1020151, roughly $98 to $149 at dealers |
| Power | A set of 12 or 8 AA alkaline cells from any store | A charger, sold separately: Single Charger around $55, Dual Charging Station around $103 |
| First shade, all in | About $18 plus the cells | Roughly $155 to $205 |
| Each extra shade | Another $17.95 wand and cells | The wand only, on the same charger |
| Between changes | About a year per set of AAs | About a year per charge |
These are approximate third-party prices, not Hunter Douglas list prices, and they move. Hunter Douglas says both kinds last about a year on a typical shade: a set of AA alkalines, or a full charge of the rechargeable wand. Bigger or busier shades need it sooner either way. A charger is not included with the wand by default, and Hunter Douglas says to use its chargers only.
The rechargeable wand starts to make sense with scale and height: many shades on a schedule, high up, where a ladder trip for a dozen AAs every year is the real cost.
Gen 3 or Legacy? The external rechargeable wand predates Gen 3, and Hunter Douglas's charge-life guidance covers it on both Legacy PowerView and PowerView Gen 3. Gen 3 also added shades with an internal rechargeable battery, launched September 13, 2022: there is no wand at all, and you charge the shade itself through an adapter at its right side. If your Gen 3 shade has no wand anywhere, that is likely what you have.
PowerView+ takes no wand. PowerView+ is the hard-wired version: the shades are cabled to a Smart Power Supply, and Hunter Douglas notes a Gen 2 and a Gen 3 Smart Power Supply cannot run each other's shades. There is no battery wand to buy for a PowerView+ shade.
Which do you have now? Loose AA batteries, or empty bays with springs and contacts, means an AA wand, and no charger exists for it. A sealed body with a small round socket at one end means rechargeable. We do not sell rechargeable wands or chargers, but Hunter Douglas rechargeable battery wand covers the part numbers, the chargers and replacing a dead one.
Do I need the power cable?
Usually not on a PowerView shade. The 13 inch power cable, part 2920247000, is the lead between the motor and the wand on PowerRise headrails. Hunter Douglas also uses it when converting a Vignette PowerRise shade made before May 2010 to the 18V wand. If your shade is dead on fresh batteries and the wand itself is sound, the cable is worth checking.
Before you order
Make sure the wand is what failed. A shade that hums, clicks or stops partway has power reaching the motor, and a new wand will not help. Is it the wand? sorts the six common symptoms in two minutes.
Both wands are genuine Hunter Douglas stock, new and unused, shipped empty. Free shipping within the United States, same day on weekday orders before 3pm Eastern, and 30 days to return an unused wand.
Not sure? Email a photo of the headrail sticker to support@batterywands.com or call (609) 474-4242, weekdays 9am to 5pm Eastern.
Replacement parts. Complete your repair.
Common parts for Hunter Douglas motorized shades.



