(609) 474-4242

What Is a Battery Wand on Hunter Douglas Shades?

A battery wand is the tube of AA batteries that powers a battery-operated Hunter Douglas motorized shade. The motor lives in the headrail, the remote tells it what to do, and the wand is what gives it the power to do it.

Already know it is the wand? Genuine 18V and 12V wands from $17.95 ↓

If a shade has stopped moving, the wand is the part most likely to have failed, and also the easiest to change.

What does a battery wand actually do?

It holds the cells and delivers their power to the motor. A wand is a battery holder and a lead, nothing more. The pairing with your remote and the shade's travel limits live in the motor, which is why the shade keeps its programming when you change the wand.

PowerView wires all the cells in series. That is how eight or twelve ordinary 1.5V AA batteries add up to the 12V or 18V the motor expects, and it is also why one weak or reversed cell drags the whole wand down.

Why a removable tube and not a built-in battery?

Because batteries wear out and motors mostly do not. With a separate wand you can change the cells yourself in a couple of minutes, with no tools and no dealer visit.

It also keeps the trouble in one place. When alkaline cells leak, the corrosion eats the contacts in the wand, and the wand slides out and gets replaced. The old sealed tubes in early PowerRise headrails could not be saved once they corroded, which is what our battery tube conversion kit fixes.

Hunter Douglas also makes a sealed rechargeable wand, but most shades do not have one. If you can see loose AA batteries, yours is not rechargeable.

Where is the battery wand on my shade?

On the back of the headrail, the box at the top of the shade that the fabric hangs from. It sits in a bracket or clip behind the headrail, usually out of sight from the room.

It comes out lengthways along the rail, not downwards. Raise the shade fully, slide the wand sideways out of its bracket, and it is in your hand. If it will not budge, try the other direction. The full walkthrough is on how to change the batteries or the battery wand.

What are the two sizes of Hunter Douglas battery wand?

Hunter Douglas fits the same two wands across nearly its entire motorized range.

18V battery wand 12V battery wand
Part number 7520068000 7520069000
Batteries Twelve AA Eight AA
Length About 14 inches About 10 inches

They are not interchangeable. The motor expects its own voltage, and the wrong wand will not run the shade. Both ship empty, so you supply the batteries.

How do I tell which one I have?

Count the batteries. Slide the old wand out and count the cells, or the empty channels if the batteries are already out.

That count works on a shade of any age, even with the label worn away, and it beats the shade name, because several lines were built with either wand. The one exception is a Pirouette 18 to 23 inches wide, which takes an eight-cell part we do not stock. The compatibility list has every line.

Hunter Douglas's own sources disagree on narrow Pirouettes: its parts store lists 7520069000 as Pirouette-compatible, while its wand identification guide gives 7520073000 or 7520067000 for 18 to 23 inch widths. So read the sticker on the old wand before you order; the Pirouette fit guide shows what each number means.

If the label is still readable, the part number is printed on it. Older wands can carry older numbers, and Hunter Douglas battery wand part numbers explains which current part replaces each one.

What is the end cap, and what does the fuse do?

The end cap closes the battery compartment and holds the contacts in line. Both current wands have what Hunter Douglas calls enhanced end caps, introduced in May 2018 for easier battery changes. A new wand can look slightly different from the old one you pull out and still be the correct part.

The 18V wand also carries a fuse in the end cap. On earlier wands, one AA pushed in backwards could short the pack. The fuse opens the circuit instead, so the fault stops at the wand rather than at a leaking pack in the headrail.

The catch: the fuse is not replaceable. A wand that has blown it is finished. That is why the orientation diagram printed on the tube is worth a careful look every time you load it.

How do I know when a battery wand has failed?

A completely silent shade on fresh batteries, or white or green crust inside the tube, are the classic signs. A shade that hums, clicks or stops partway is a different fault. Is it the wand? sorts the six common symptoms in two minutes.

Where can I get a replacement?

We stock both current wands, new and unused in original Hunter Douglas packaging:

Shipping is free within the United States, orders placed before 3pm Eastern on a weekday ship the same day, and you have 30 days to send back a wrong part.

Not sure? Email a photo of the headrail sticker to support@batterywands.com or call (609) 474-4242, weekdays 9am to 5pm Eastern.

Replacement parts. Complete your repair.

Common parts for Hunter Douglas motorized shades.

All Hunter Douglas battery wands